鋁合金電梯門套安裝

　　Installation of aluminum alloy elevator door frames

　　1. 引言

　　1. Introduction

　　本文檔旨在提供鋁合金電梯門套安裝的詳細指導。電梯門套作為電梯門的裝飾件，不僅具有美觀的外觀，還能夠保護電梯門的外圍結構。安裝過程需要具備一定的技術知識和操作經驗。本文將逐步介紹鋁合金電梯門套安裝的步驟和注意事項。

　　This document aims to provide detailed guidance on the installation of aluminum alloy elevator door frames. As a decorative component of elevator doors, elevator door frames not only have a beautiful appearance, but also can protect the outer structure of elevator doors. The installation process requires a certain level of technical knowledge and operational experience. This article will gradually introduce the steps and precautions for installing aluminum alloy elevator door frames.

　　2.安裝步驟

　　2. Installation steps

　　2.1 準備工作

　　2.1 Preparation work

　　在進行鋁合金電梯門套安裝前，需要準備以下工具和材料:

　　Before installing the aluminum alloy elevator door frame, the following tools and materials need to be prepared:

　　-電動螺絲刀和手動螺絲刀

　　-Electric screwdriver and manual screwdriver

　　-密封膠

　　-Sealing glue

　　-鋼尺和量角器

　　-Steel ruler and protractor

　　-清潔布

　　-Cleaning cloth

　　-木馬和木夾板

　　-Trojans and wooden planks

　　2.2 測量尺寸

　　2.2 Measurement of Dimensions

　　在安裝之前，需要詳細測量電梯門的尺寸。使用鋼尺和量角器測量門洞的寬度、高度和深度等參數，確保鋁合金電梯門套與門洞相匹配。

　　Before installation, it is necessary to measure the dimensions of the elevator door in detail. Measure the width, height, and depth of the door opening using a steel ruler and protractor to ensure that the aluminum alloy elevator door frame matches the door opening.

　　2.3 安裝門套

　　2.3 Installing door frames

　　(一)安裝工具1、主要安裝工具:電錘、沖擊鉆、汽釘槍、氣泵、氬弧焊機、氣瓶等。2、輔助安裝工具:水平儀、垂直尺、鉛墜儀、射釘槍及射釘、木工電鋸、角磨機等,均采用國內名牌產品,并定期到有關檢驗部門進行檢驗。3、安裝工具的特點:準確率高,效率快,能適應各大型工程的不銹鋼電梯門套的安裝使用。

　?。?） Installation tools 1. Main installation tools: electric hammer, impact drill, air nail gun, air pump, argon arc welding machine, gas cylinder, etc. 2. Auxiliary installation tools: level, vertical ruler, plumb bob, nail gun and nail, woodworking electric saw, angle grinder, etc., all of which are domestic famous brand products and regularly inspected by relevant inspection departments. 3. The characteristics of installation tools are high accuracy, fast efficiency, and the ability to adapt to the installation and use of stainless steel elevator door frames in various large-scale projects.

　　(二)電梯門套的安裝:

　?。?） Installation of elevator door frames:

　　1、不銹鋼電梯門套的安裝工序:購買材料:15mm大芯板,九厘中密度板,1.15mm不銹鋼板。

　　1. Installation process of stainless steel elevator door frame: Purchase materials: 15mm large core board, 9cm medium density board, 1.15mm stainless steel plate.

　　(1)根據電梯門洞口尺寸下料:龍骨采用大芯板切割和面板。

　　(1) Cut according to the size of the elevator door opening: the keel is made of large core board cutting and panel.

　　(2)分層安裝龍骨和面板:把龍骨與墻固定牢。

　　(2) Layered installation of keel and panel: Fix the keel firmly to the wall.

　　(3)電梯門框上找2cm線。

　　(3) Find a 2cm line on the elevator door frame.

　　(4)在2200mm左右邊水泥墻上安裝間距≤500mm龍骨五處,下部距地面100mm,上部距頂端200mm,中間均與分布間距≤500mm;上部兩處。

　　(4) Install five keels with a spacing of ≤ 500mm on the cement wall around 2200mm, with the lower part 100mm above the ground and the upper part 200mm above the top, with a spacing of ≤ 500mm between the middle and the distribution. Install two keels on the upper part.

　　(5)安裝面板,調整好面板的水平度和垂直。

　　(5) Install the panel and adjust its levelness and verticality.

　　(6)最后把面板固定牢固。

　　(6) Finally, fix the panel firmly.

　　2、電梯門套木龍骨框安裝的允許偏差電梯門套的造型是多種多樣的,例如:不銹鋼的,石材的等等。其實您在選擇的時候不僅需要根據整體的設計,最好是還要貨比三家,因為這樣才可能找到您心中的那一款。以上就是對于鋁合金電梯門套施工方案以及鋁合金電梯門套的安裝,進行的講述,希望對您有一定的幫助！

　　2. The allowable deviation for the installation of elevator door frames with wooden dragon bones is that there are various shapes of elevator door frames, such as stainless steel, stone, and so on. In fact, when choosing, you not only need to consider the overall design, but it is also best to compare prices from three different sources, because only then can you find the one in your heart. The above is a description of the construction plan and installation of aluminum alloy elevator door frames. We hope it will be helpful to you!

　　本文由  聊城鋁合金電梯門套  友情奉獻.更多有關的知識請點擊  http://www.tljqyly.cn/   真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Liaocheng aluminum alloy elevator door frames For more related knowledge, please click http://www.tljqyly.cn/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.