電梯門套的定額套取需根據材質、施工方式及地區定額標準綜合確定，具體方法如下：

　　The quota set for elevator door frames needs to be determined comprehensively based on the material, construction method, and regional quota standards. The specific method is as follows:

　　一、基礎套取原則

　　1、 Basic Retrieval Principle

　　分類型套取

　　Classification type retrieval

　　不銹鋼門套 ：若定額中包含木工板基層，則無需額外套取；若不含，則需補充木工板墻面基層子目。

　　Stainless steel door frame: If the base layer of the wooden board is included in the quota, no additional frame is required; If not included, it is necessary to supplement the wooden board wall base sub item.

　　石材門套 ：如花崗石材質，需根據市場價補充定額子目，因多數地區無專用石材門套定額。

　　Stone door frame: Made of granite material, additional quota sub items need to be added based on market prices, as most regions do not have dedicated stone door frame quotas.

　　門套類型 ：小門套通常由電梯設備自帶（噴涂鋼板/不銹鋼），無需額外購買；大門套需根據現場需求采購。

　　Door frame type: Small door frames are usually provided by elevator equipment (coated steel plate/stainless steel) and do not require additional purchase; The gate cover needs to be purchased according to on-site requirements.

　　測量與尺寸

　　Measurement and Dimensions

　　電梯門套線沿門洞四周（不含頂部）測量，寬度需覆蓋墻與門框間隙，長度為側板高度加線條寬度，底部可設置小腳座。

　　The elevator door frame line is measured around the door opening (excluding the top), with a width covering the gap between the wall and the door frame. The length is the height of the side panel plus the width of the line, and a small footrest can be set at the bottom.

　　若門套直接到頂，需區分是否與原墻面重復施工（如未貼瓷磚時）。

　　If the door frame reaches directly to the top, it is necessary to distinguish whether it is constructed repeatedly with the original wall surface (such as without tiling).

　　二、特殊場景處理

　　2、 Special scenario handling

　　拆除定額 ：電梯口門套拆除費用通常按安裝人工費的30%-40%計算，需結合監理確認。

　　Demolition quota: The cost of dismantling elevator door frames is usually calculated at 30% -40% of the installation labor cost, which needs to be confirmed by the supervisor.

　　裝飾與節點 ：不銹鋼門套厚度多為1.0-1.2mm，節點圖分為基本型和帶裝飾線型，需根據設計要求選擇。

　　Decoration and nodes: The thickness of stainless steel door frames is mostly 1.0-1.2mm, and node diagrams are divided into basic types and decorative line types, which need to be selected according to design requirements.

　　三、注意事項

　　3、 Precautions

　　地區差異 ：不同省份定額標準可能不同，例如重慶需參考當?shù)匮b飾分部門窗套定額。

　　Regional differences: The quota standards may vary in different provinces, for example, Chongqing needs to refer to the local decoration department's quota for door and window frames.

　　市場價補充 ：若無合適定額，可直接按市場價計算主材費用，并結合運輸成本（按重量/體積/距離）。

　　Market price supplement: If there is no suitable quota, the main material cost can be calculated directly based on the market price, combined with transportation costs (by weight/volume/distance).

　　建議實際操作中結合項目所在地的定額手冊和最新市場報價，必要時咨詢當?shù)卦靸r部門或?qū)I(yè)工程師。

　　It is recommended to combine the quota manual and the latest market quotation of the project location in practical operation, and consult the local cost department or professional engineer if necessary.

　　本文由 德州電梯不銹鋼包邊  友情奉獻.更多有關的知識請點擊  http://www.tljqyly.cn/   真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Dezhou Elevator with stainless steel edging For more related knowledge, please click http://www.tljqyly.cn/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.