More and more people like to install door jambs in the process of home decoration, because the door behind the door can greatly improve the level of the whole house decoration, making the house look more fashionable and beautiful, so it has gradually become a very popular product. Now I will explain its material to you.

1、多層板貼面門套多層板貼膜(PVC)或貼紙油漆等,由于其外表選用貼合技術,在濕潤枯燥環境中貼面與之間易掉落、脫層、呈現面層起泡景象,不平坦。長期使用貼面與板材之間會發生厭氧菌,使資料發生變形,影響使用及漂亮,因而假如居室環境對比濕潤,那么好不要選擇此類型的,由于假如一旦呈現問題,那么其木門也會呈現一些或多或少的質量問題。

1. Multilayer panel veneer door jamb Multilayer panel veneer (PVC) or sticker paint, etc., due to the use of adhesion technology for its appearance, the veneer is easy to fall off, delaminate, and present a blistering surface in a humid and dry environment. Anaerobic bacteria will occur between the veneer and the board after long-term use, which will deform the data and affect the use and beauty. Therefore, if the living environment is relatively wet, it is better not to choose this type of door. If problems are presented, the wooden door will also present some more or less quality problems.

2、多層板UV漆飾面是一種新型的,多層板選用轉印木紋,外表UV漆飾面技術,商品色澤豐滿、美麗,因選用UV漆飾面從而使商品到達使用的佳狀況,具有不變形、不開裂、防潮、防熱、耐磨等特色。

2. The multilayer board UV paint finish is a new type. The multilayer board uses the transfer wood grain and the exterior UV paint finish technology. The color of the goods is plump and beautiful. Because the UV paint finish is selected, the goods can reach the good condition of use. It has the characteristics of no deformation, no cracking, moisture resistance, heat resistance, wear resistance, etc.

3、鋼材質選用了鋼質門門框的制造技術,它與門扇無色差,由鋼板定形而成,外表選用轉印烤漆技術。此類大多為單面線條且線條對比單一,裝置辦法與鋼質門相同,使其失去了鋼木套裝室內門的實質。

3. The steel material adopts the manufacturing technology of the steel door frame, which has no color difference with the door leaf, and is shaped by the steel plate. The surface adopts the transfer printing and baking paint technology. Most of these are single sided lines with single line contrast. The installation method is the same as that of steel doors, which makes them lose the essence of steel and wood interior doors.

4、密度板材質主要選用密度板外表貼紙做油漆或貼PVC膜制造,因密度板是用秸稈纖維加膠水,經高壓而成,故在吸水后會脹大、發霉、變形,在脹大后其密度大大降低,從而影響了握釘力和使用壽命,因而假如居室濕潤,那么這類木門的也不太合適使用。

4. The material of the density board is mainly made of paint or PVC film pasted with stickers on the surface of the density board. Because the density board is made of straw fiber and glue under high pressure, it will swell, mildew and deform after absorbing water, and its density will be greatly reduced after swelling, thus affecting the nail holding force and service life. Therefore, if the room is wet, then this kind of wooden door is not suitable for use.